Calender Corkboard

Hi everyone!

Today I have a fun project for you ~ a calendar corkboard. These compact little calendars can be used anywhere in your home ~ on a desk, kitchen counter or night stand. Because they use basic supplies, a few can be created to coordinate with your décor. So let’s get started shall we?


You will need: chipboard, patterned paper, cutting tools of choice, adhesive, corner rounder, sanding block or nail buffer, 1/8″ hole punch or crop-a-dile, ribbon, calendar print outs {links below}, stapler or brads, paper piercer/piercing mat {if using brads}, eyelets/eyelet setter or crop-o-dile. ∗Please note: if you don’t have chipboard, don’t fret. Cardboard packaging, like a cereal box will work just fine. Just be sure that whatever you use is a little on the thicker side. This will make it easier for the calendar to stand nicely.


#1} Download and print off the PDF calendars. Thank you to for their free downloads! calendar1   and   calendar2




#2} Cut apart into months. Mine ended up measuring 3″ high x 3 1/2″ wide.



#3} Stack the months lining up the edges. Staple on each end close to the top or just one staple above the month. Or, if you are using brads, measure and make two pencil marks where you want the brads to go. I measured in/down 1/4″ each way. Pierce holes with a paper piercer/mat.



#4}  Add brads. Cut a backing mat about 1/8″ larger that the calendar all the way around and adhere calendar to it. ∗Please note: Once 2018 is here, just download, print off, cut and stack the new months. Carefully remove the old calendar and adhere the new stack to the mat to enjoy your calendar for another year.



#5} Cut two chipboard pieces and four patterned paper pieces {two for the front/back and two for the insides}. I just have two patterned paper pieces shown to fit in the picture. Round the corners, if desired. The measurements for both are 4″ x 5 1/2″.




#6} Adhere patterned paper to all four sides and lightly sand edges to smooth. On the outside of the front piece and the back piece, measure 3/8″ down and 3/4″ in towards the center, make pencil marks and punch holes with a hole punch. Add eyelets.



#7} Add some foam adhesive to the back of the calendar mat and adhere to front patterned paper/chipboard piece. Cut a piece of cork that measures 3 3/4″ x 1 1/2″. The cork I used was just thick enough that it wouldn’t fit in the corner rounder so I rounded the corners with small scissors instead. Adhere below calendar. ∗Please note: because the cork is thinner than a typical corkboard, it’s best to use the smallest thumbtacks you can find.



#8} Put the front and back together, add ribbons through eyelets, tie into knots or bows and trim off the excess. There you go! You now have a pretty little calendar to put anywhere in your home 🙂


I hope you enjoyed todays tutorial. As always, please feel free to share what you create!




*Please feel free to sign up as a follower to receives updates by email so you don’t miss a thing!




Until next time,


The Country Touch